Solve HP Printer Stopped Printing Black Issue With The Most Effective Ways

HP printer are always of high quality. Sometimes, however, the black cartridge on the HP Printer may stop working. In these cases, it is impossible to print the correct documents. This is a common issue with HP printers. We will discuss the causes of this problem and offer possible solutions. If they are maintain and use properly, HP printer can be very reliable. If you want to have uninterrupted service, you will need to use generic cartridges for your HP printer.

HP Printer Stops Printing Black Issue

This issue can be cause by many factor. We have identified several possible causes that your HP printer may stop printing black. These are the causes.

  • First, check if the “Breather tape” locate at the top of your cartridge has been remove completely. The Breather Tape, also known as the shipping tape, is what prevents ink from escaping the cartridge.
  • It can also be cause by a damage or empty cartridge. In this case, you will need to replace the cartridge. Any issue related to printer visit printer repair dubai. You can also permanently damage your print head if you print with empty cartridges.
  • Low-quality cartridges can cause problems with your HP Printer. The best option is to use high-quality HP ink cartridges.

How do you solve the HP Printer Issue of Black Printing?

Let’s look at the best ways to fix your HP printer that stops printing black. Follow the steps below.

Solution 1: Verify the ink levels and replace any empty cartridges

This is the first step we will explain. Follow these steps to check your ink levels. You will need to replace any low or empty cartridges.

Step 1: Verify the ink levels

Follow these steps to verify the ink levels, and reverify once more.

  1. First, load plain white paper into the tray. Then, choose the slide button. The Setup icon at the lower-left corner.
  2. Then touch the Right Arrow button to select the Tools option. Finally, [press OK].
  3. To select Estimated Ink Levels you will need to touch the Right Arrow button and then click OK.

Know more- HEALTH AND FITNESS BENEFITS OF SWIMMING.

You don’t need to replace any ink cartridges if they are not low. You must continue the next step if any of your ink cartridges run out.

Step 2: Refill any empty or low cartridges

First, load plain white paper into the input tray. Next, press the Power button to turn on the printer.

  1. Then, open the cartridge door to wait for the printer to idle.
  2. Once you have done that, press down on your cartridge to release it. Then pull it out and remove it from its slot.

You will need to take the cartridge out of its packaging and place it in a safe place. Next, insert the cartridge in its color-coded slot. Next, make sure the icon on your cartridge matches that on the slot. Finally, close the cartridge door.

Step 3: Align your printer

You will need to align the cartridges by following the instructions below.

  1. Next, touch the slide button. Then, select the Setup icon at the lower-left corner.
  2. Click on the Right Arrow button to select Tools and then click OK.
  3. Once again, click the Right Arrow button and select the Align Printer option. After you are done, the printer will start printing an alignment page.

You will now need to lift the printer lid, then place the alignment pages. Once you have completed all of the pages above, close the printer lid and hit the OK button. Also visit printer repair Dubai. The final step is to scan the alignment sheet. This completes the alignment process.

Solution 2: Clean the printhead with an automated tool

If the problem persists, then try the following method. Basically, an automate tool is used to clean the printhead.

  1. This step requires that you load plain white paper into the input tray as in previous steps.
  2. Touch the slide button to select the Setup icon at the lower-left corner.
  3. Next, click on the Right Arrow button and open Tools.

After you are done, touch the Right Arrow button to select the Clean Printhead option. Then, press OK. The printer will now start the cleaning process. Your problem will then be solve.

This will help you to fix the HP printer stopped printing black problem. We hope you understand these steps. If you still have problems, we recommend that you contact an expert to get better assistance.

Similar Articles

Comments

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular